Send Email
Send SMS
Search
Enkay Enterprises
Enkay Enterprises


Rock Testing Equipment

We are offering a wide range of Rock Testing Equipment. Our products range in which includes the Polishing and Lapping Machine, Core Drilling Machine and Point Load Tester.

Point Load Tester

REQUEST CALLBACK

Point Load Tester
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 27,175 / PieceGet Latest Price

Being one of the preferred choices of our customers, we are involved in proffering Point Load Tester that can be availed at affordable rates. This lightweight and portable equipment finds a major application in drilling sites and laboratory as well. Point load tester is equipped with an adjustable frame and hydraulic jack.

Features:


  • Equipment is light and portable
  • Rock core specimens can be tested without any preparation
  • The instrument can be used in the laboratory as well as at the drilling site
  • The results of the test may also be used to predict the uniaxial compressive strength of rock
  • With this instrument, a wide range of core sizes can be tested
  • The frame has adequate adjustments to align perfectly the loading axis passing through the centre of the bearing plates and loading platens at position of the ram of the hydraulic jack

Specifications:


  • EKE 20601: Loading Frame, fitted with Hydraulic Jack, hand operated, capacity 100kN (10,000 kgf)
  • EKE 20602: Load Gauge, 0-25kN (2,500 kgf) x 0.25 kN(25 kgf)
  • EKE 20603: Load Gauge, 0-100kN (10,000 kgf), x 0.50 kN (50 kgf)
  • EKE 20604: Conical Loading Platens

Additional Information:

  • Item Code: EKE-206-1
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    Polishing & Lapping Machine

    REQUEST CALLBACK

    Polishing & Lapping Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 65,000 / PieceGet Latest Price

    Enkay Enterprises is a trusted name in the industry that manufactures, exports and supplies Polishing and Lapping Machine. Provided in several specifications, these efficient machines come with sample holders and adapter to hold polishing paste or cloth. Due to the reliable performance, continuous water feed arrangement and tough construction, these are vastly popular.

    Features:

    • Reliable performance
    • Efficient
    • Tough construction

    Specifications:


    • Compact Table Model
    • 20 Cm dia Top and Adapter to hold polishing cloth or paste
    • Sample Holders to accommodate upto NX size Cores
    • Continuous water feed arrangement during operation
    • This unit is provided with a 1/4 HP, single phase, AC motor

    Accessories:

    • EKE 20301: Sample Holder for EX size
    • EKE 20302: Sample Holder for AX size
    • EKE 20303: Sample holder for 8 mm size
    • EKE 20304: Sample Holder for Bx Size
    • EKE 20305: Sample Holder for Nx Size

    Additional Information:

  • Item Code: EKE-203
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    Core Drilling Machine

    REQUEST CALLBACK

    Core Drilling Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.59 Lakh / PieceGet Latest Price

    We are among the leading manufacturers and suppliers of Core Drilling Machine that is made in adherence to the preset industry guidelines. These precisely engineered machines are equipped with pillar type frame with 2 HP and single phase AC motor. Proffered selection is appreciated for its consistent operation and robust construction.

    Features:

    • Robust construction
    • Precisely engineered
    • Consistent operation

    Specifications:


    • Heavy duty, Pillar type frame with 2 HP, single phase, AC motor
    • Varying Cutting feeds provided with water-fed swivel head which can be connected to suitable water supply
    • Provision at base for water collection/drainage
    • Core Preparation from regular and irregular samples
    • Core Size: EX to NX
    • Clamping arrangement to hold specimens with regular/irregular shapes to the base of machine
    • Four cutting speeds of 600, 800, 1100 and 1500 rpm
    • Following Core Bits are available as options: EKE 20101
    • Core Drilling Bit, 21.46 mm dia (EX size): EKE 20102
    • Core Drilling Bit, 30.10 mm dia (AX size): EKE 20103
    • Core Drilling Bit, 38 mm dia: EKE 20104
    • Core Drilling Bit, 42.04 mm dia (BX size): EKE 20105
    • Core Drilling Bit, 54.74 mm dia (NX size)

    Additional Information:

  • Item Code: EKE-201
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    Slake Durability Apparatus

    REQUEST CALLBACK

    Slake Durability Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 40,500 / PieceGet Latest Price

    Ours is a reputed name in the industry that manufactures, supplies and exports precisely designed and developed Slake Durability Apparatus. These are used for determination of resistance by rock to disintegration and weathering when immersed in water. Made available in different sizes, the offered apparatus is extremely popular in the industry for its vast testing range, portability and ease of maintenance.

    Features:

    • Portable
    • Precisely designed and developed
    • Efficient performance

    Specifications:

    • Base Board with Motor Drive assembly with tow drum and tank assemblies. Suitable for working at 220 V, Single Phase, AC supply
    • Supply with EKE20802 Electric timer, 0-30 min

    Optional Accessories:

    • EKE 20801: Pair of Drums and Tank Assemblies, including coupling, to enable upto 4 test drums to be driven at a time
    • EKE 20802: Electrical Timer, 0-30 min

    Additional Information:

  • Item Code: EKE-208
  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    Electronic Instrumentation

    REQUEST CALLBACK

    Electronic Instrumentation
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 15,000 / PieceGet Latest Price

    Electronic Instrumentation is manufactured in accordance with the predefined industry guidelines so as to keep up with the quality norms. Owing to the giant capacity, low power consumption and amazing resolution, these instrumentation are massively required among our clients. We carry out multiple stringent tests on the proffered range before the final send off.

    Features:

    • Giant capacity
    • Low power consumption
    • Amazing resolution

    Specifications:

    EKE 21401Load Cell
    Capacity500 kN (50,000 kgf)
    Resolution0.1 kN (10 kgf)
    Load Cell Excitation7.5 V DC
    Sensing ElementStrain gauges in full bridge configuration
    EKE 21402Pore Pressure Transducer
    Capacity200 bar (200 kg/cm2)
    Resolution0.1bar (0.1 kg/cm2)
    Pressure Cell Excitation7.5 V DC
    Sensing ElementStrain gauges in full bridge configuration
    EKE 21403Digital Indicator, (Double Channel)
    Mode of DisplayDigital, 3.5 digit
    Power Supply230 V ±10%, 50 Hz, AC
    Number of ChannelsTwo

    Additional Information:

  • Item Code: EKE-214
  • Yes! I am Interested

    Core Cutting And Grinding Machine

    REQUEST CALLBACK

    Core Cutting And Grinding Machine
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 98,000 / PieceGet Latest Price

    Product Code: EKE 202
    • Table Mounted
    • Stable Construction
    • Feed arrangement for cutting
    • Cooling water arrangement
    • Heavy Duty, AC, single phase motor

    This unit is designed for cutting and grinding cylindrical rock specimens upto NX size. The outfit includes 200 mm dia diamond impregnated cutter, a fine diamond impregnated grinding wheel, a water supply system and sample holder.

    A V-Vice, to hold the sample upto 55 mm dia x 140 mm long to be cut parallel and square to the longitudinal axis is provided. Cores longer than 140 mm can be prepared by reversing the specimen and holding against the vice. A hand feed arrangement is provided to facilitate the specimen with a uniform and smooth feeding motion.
    This unit is provided with a 1HP, single phase, AC motor.


    Yes! I am Interested

    Miniature High Pressure Permeameter

    REQUEST CALLBACK

    Miniature High Pressure Permeameter
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 25,000 / PieceGet Latest Price

    Product Code: EKE 205

    This equipment is used for determining the permeability characteristics of soils, solidified soils and rock cores. High pressure permeability studies can also be carried out using this unit.

    The complete outfit comprises

    EKE 20501 Mould, 50 mm dia x 100 mm high, with Collar
    EKE 20502 Top Plate
    EKE 20503 Base Plate, with recess for Porous Stone
    EKE 20504 Pipette, 6 mm x 300 mm long
    EKE 20505 Reservoir Tank, fitted with 7 kg/cm² Gauge, Valves, Flow Control Regulator and Foot Pump
    EKE 20506 Porous Stone, to fit into Base Plate

    Yes! I am Interested

    Flat Jack Outfit

    REQUEST CALLBACK

    Flat Jack Outfit
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,200 / PieceGet Latest Price

    EKE 22001Flat Jack, 30 cm x 30 cm1 No.
    EKE 22002Hydraulic Pump, hand operated,
    with 15 cm dial Pressure Gauge
    of 70 kg/cm² capacity with flexible
    Pressure Pipe of 1 m length
    1 No.
    EKE 22003Deformeter, consisting of
    a Dial Gauge having 10 mm
    travel and 0.002 mm least count, and
    two interchangeable Stems for
    150 mm and 250 mm gauge length
    1 Set
    EKE 22004Standard Bar1 No.
    EKE 22005Reference Pins6 Nos

     

    For measuring in-situ rock stress close to the surface of excavation. The method consists of cutting a slot, thereby relieving the stresses perpendicular to the slot, resulting in the deformation of the slot, which is measured. Flat Jack is then embedded in the slot and grouted. Hydraulic Pressure is applied through the flat jack until the displacements which took place on slot cutting are reduced and finally cancelled. By measuring
    the cancellation pressure in two mutually perpendicular directions, the in-situ stress close to the rock surface can be assessed approximately.

    Yes! I am Interested

    Digital Point Load Tester Apparatus

    REQUEST CALLBACK

    Digital Point Load Tester Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 10,000 / PieceGet Latest Price

    Product Code: EKE 206-DG 001
    Standrad: (ASTM D5731 )

    TECHNICAL SPECIFICATIONS

    Model Number : EKE 206-DG
    Dimension : 400x530x720 mm.
    Weight : 25 Kg

    Accessories:

    EKE 206-DG 001 Set of Hardened Conical Cone
    EKE 206-DG 003 Lower Plate and Upper Plate with seat ball to modify the Point Load Tester into a portable compression test-

    Used to determine the strength values of a rock specimen both in the field and in the laboratory. It consists of a load frame for applying loads up to 55 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to 4” (101,6 mm) diameter which are loaded by two coneshaped points. A graduated scale indicates the distance between the conical points. The applied load is measured by a pressure transducer with a digital display unit range 0-56kN, 65.000 divisions, 0,001 kN resolution, accuracy: ± 1%. The strength index (IS) is got by the formula P : D2 where P is the strength and D the space between the two conical points.

    Yes! I am Interested

    Triaxial Rock Testing System

    REQUEST CALLBACK

    Triaxial Rock Testing System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1 Lakh / PieceGet Latest Price

    Product Code: EK.RT-150
    • Direct closed-loop digital servo control of axial stress, average principle stress, axial strain, radial strain, and several othercalculated triaxial variables
    • 1,500 kN Load capacities and 1,750 kN/mm stiffness.
    • Enkay High Pressure Triaxial cell with internal instrumentation to measure local axial and radial strains 140 MPa servo-controlled pressure intensifier system for cell and pore pressure.
    • Available options: axial and circumferential deformation measurement system, platens with ultrasonic transducers, and high temperature control subsystem.
    • Ideal for performing unconfined compression, triaxial, bending, indirect tension, fracture, creep, post failure behavior, other compression tests.
    • Economical "turn-key" systems built to customer specifications.
    • Optional automatic hydraulic lift for triaxial cell and roller assembly for fast easy specimen setup

    ENKAY Triaxial Rock Testing Systems are manufactured according to your design specifications (load capacity and system stiffness, sample size, confining and pore pressures, internal instrumentation, temperature testing, and ultrasonic velocity measurements). The top cross head height can be adjusted to accommodate a wide variety of test specimens and triaxial cells. The EK.RT-150 meets the specifications of the International Society for Rock Mechanics (ISRM) for triaxial testing of rock samples. The system is capable of performing static and dynamic closed- loop strain or stress controlled as well as post failure behavior tests. Included with this system is our true 32-bit Windows XP Software. It allows sending directly your test data to any computer connected to your local network. Our new software includes a database system to keep track of all the data generated at your lab with any of our testing systems. Using a Windows network system in your lab facilitates the transferring of your test data directly into other Windows programs such as Word or Excel for report generation as well as to easily backup your important tes


    Yes! I am Interested

    Rock Deformation Device

    REQUEST CALLBACK

    Rock Deformation Device
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 4 Lakh / PieceGet Latest Price

    Product Code: EK.DF-500

    Available sizes for specimen diameter from 25 mm to 150 mm (optional sizes available)
    Measures axial and lateral strain directly on the test specimen
    Two axial sensors one circumferential sensor
    Uses LVDT's for ease of operation
    Models for up to 200 MPa pressure and up to 150 ºC temperature testing
    Very easy to set up and use

    SPECIFICATION

    ModelSpecimen Size LVDT Range(Diameter in mm)
    EK.DF-51025 to 555
    EK.DF-52050 to 755
    EK.DF-53070 to 10010

    The ENKAY Rock Deformation Device measures axial and lateral strain directly on the specimen providing accurate results. The device consists of an upper and lower support ring machined with a low weight, high strength design. The rings include spring loaded set screws to allow for specimen expansion during loading. A set of perforated rods with pre-set lengths is included to position the axial rings at pre-defined gage lengths without difficulty. The circumferential device is built with small, high precision rollers and stiff linkages for high accuracy strain measurements. Thumb screws are also provided to easily null the LVDT sensors. The ENKAY Rock Deformation Device is available in standard sizes and also in custom sizes and is available with LVDT ranges from 2 to 10 mm.
    This device can be used within our high-pressure triaxial cell and also used for elevated or cold temperature testing. Elastic constants such as Young's modulus and Poisson's ratio can be determined as well as inelastic strains that occur after sample failure (post failure analysis). Direct servo control of axial or radial strains can be performed with this device.

    Yes! I am Interested

    Indirect Tension (Brazilian) Apparatus For Rocks

    REQUEST CALLBACK

    Indirect Tension (Brazilian) Apparatus For Rocks
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 44,000 / PieceGet Latest Price

    Available sizes for specimen diameter from 50 mm to 150 mm (Note that ISRM recommends that the diameter shall not be less than NX core – 54-mm diameter).
    Made of hardened stainless steel.
    Can be used with ENKAY unconfined, triaxial and point load tester frames.
    Very easy to set up and use.

    The ENKAY EK.IT-B Rock Apparatus is used for determining indirect tensile strength by the Brazil test according to the International Society for Rock Mechanics standard.
    The device consists of an upper and lower support ring machined with a low weight, high strength design. The Indirect Tension Apparatus is available in standard sizes and also in custom sizes.

    SPECIFICATION

    Loading jaws for testing 54-mm (NX) diameter and 27-mm thick samples by the Brazil test). Top and bottom jaws 30 mm wide with 39-mm radius and guide pins to allow rotation of one jaw relative to the other. Top jaw includes spherical seating with HRC 45 hardness.
    Half ball bearing. Spherical platen formed by a 25mm half ball bearing.
    Meets ISRM suggested method for Determining Tensile Strength by the Brazil measures axial and lateral strain directly on the specimen providing accurate results.

    Yes! I am Interested

    Compression Frames

    REQUEST CALLBACK

    Compression Frames
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 72,000 / PieceGet Latest Price

    Product Code: EK.CFR-100

    Compression frames for testing rocks, concrete, and other construction materials Pre-stressed four-column and adjustable crosshead design
    Load capacities up to 4,500 kN (1,000 kips) and stiffness up to 4,300 kN/mm (25x106 lbs/inch) Closed-loop digital servo control
    Accepts ENKAY High Pressure triaxial cell other testing components Available integrated hydraulic lift for triaxial cell for easy setup
    Ideal for performing unconfined compression, triaxial, bending, indirect tension, fracture, creep, and other compression tests Economical “turn-key” systems built to customer specifications.

    ENKAY Compression Frames are typically operated with our Digital Servo Control software and hardware package that includes the electro-hydraulic power unit, servo valve, sensors, computer interface, and testing software.
    Available with these frames is an automatic hydraulic lift for triaxial cell and roller assembly for fast and easy specimen setup. This option is recommended with ENKAY high-pressure triaxial cells. These frames can also use an economical air/oil pressure booster instead of the electro-hydraulic power unit for long term compression tests like the creep test.

    SPECIFICATION

    For Typical Systems (EK.CFR-100-5)

    Axial load capacity (static) : 1,000 kN
    Axial load capacity (dynamic) : 800 kN
    Stiffness : 700 kN/mm
    Stroke : 50 mm
    Servo valve capacity : 19 l/min
    Distance between columns : 400 mm
    Distance between platens : 600 mm

    Yes! I am Interested

    Servo Controlled Consolidation Apparatus

    REQUEST CALLBACK

    Servo Controlled Consolidation Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1 Lakh / PieceGet Latest Price

    Constant Rate of Strain (CSR), Constant Gradient (CG), and conventional Consolidation Tests Electro-Pneumatic Servo Control 10 kN load capacity
    Automatic data logging and report generation Customized Systems also available on request

    The ENKAY Consolidation Apparatus is capable of performing Controlled Gradient (CG), Constant Rate of Strain (CRS), and Incremental (conventional) consolidation tests. The device is to be used inside the triaxial chamber and loading frame. Includes stainless steel specimen ring, porous stones, o-ring seals, and necessary plumbing.
    During the controlled gradient (CG) test, a pore pressure transducer mounted on the base provides a feedback signal, which is used in the operating software to provide a preset loading rate on the test specimen.
    The constant rate of strain test (CRS) can also be performed using the ENKAY Consolidation Apparatus. Using deformation sensor, which monitors axial strain on the specimen, the sample is loaded at a preset rate of strain controlled by the system software. The conventional or incremental consolidation test is performed through application of an axial load on the test specimen at preset loading steps or increments.

    The ENKAY EK.SCCA-10 Consolidation Apparatus includes a loading frame, load cell, deformation sensor, pore pressure sensor, servo valve and the EK.SN-150 servo controller and data acquisition system to automatically perform the above tests. Windows software is also provided to set the tests as well as to monitor in real time the test data and data reduction. ENKAY can also provide consolidation systems for larger specimens and larger loads. Other options include bender elements to measure shear wave velocities and ceramic disks to obtain soil-watercharacteristic curves. Please contact ENKAY to inquire about these or any other option.

    SPECIFICATION

    Maximum Load : 10 kN
    Standard Specimen size : 63 mm (2.5 inch)
    Maximum Specimen Size : 75 mm (3 inch)
    Excitation : 10 VDC
    Operation : 220 VAC 1,000 kPa dry, compressed air is not a part of standard supply

    Yes! I am Interested

    Pressure Intensifier System

    REQUEST CALLBACK

    Pressure Intensifier System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2.5 Lakh / PieceGet Latest Price

    Product Code: EK.HPV-070

    Closed-loop digital servo control of pressure or flow (volume) with “bump-less” transfer 70 MPa (10,000 psi) pressure range 500 cc stroke capacity
    Stainless-steel construction

    Can be used as a volume change measurement device for triaxial and permeability testing
    Larger pressure and volume stroke capacities also available

    ENKAY Pressure Intensifiers are ideal for the servo control of the cell pressure in triaxial tests, head pressure in permeability tests, or fluid pressure in hydro-fracture tests. This intensifier can also be used to measure flow in permeability tests and volume change in triaxial tests while applying prescribed pressures. Together with Enkay digital servo controller and the triaxial software, it allows the performance of more advanced tests such as stress/strain path.
    The EK.HPV-070 is mounted in a metal cabinet on casters to house the confining pressure/volume servo controlled intensifier, fluid reservoir, sight level gage, and venturi vacuum pump. All valves are mounted on the front panel for easy intensifier operation and filling or draining the cell.
    ENKAY makes a dual piston intensifier model for tests where continuous flow is required and pressure spikes cannot be tolerated. These models include two intensifiers and two servo valves together with the necessary check valves, plumbing, and special control software for automatic operation. Also available, as an alternative, is an economical air/oil pressure booster. These units operate with 700 kPa (100 psi) air pressure input for a 70 MPa (10,000 psi) output.
    ENKAY pressure boosters offer a low cost, trouble free operation and are ideal for use in creep and sustained loading in long term tests.

    SPECIFICATION

    Pressure control precision : ±0.1 MPa (15 psi)
    Pressure transducer resolution : 0.02 MPa
    Volume transducer resolution : 0.01 cc.
    Pressure test gauge accuracy : ±0.25%.
    Fluid media compatibility : oil and water (consult ENKAY for other)
    Fluid reservoir capacity : 19 litre (5 gallon)
    Required pressure input : 21 MPa (3,000 psi)

    Yes! I am Interested

    Direct Shear Testing System For Soils

    REQUEST CALLBACK

    Direct Shear Testing System For Soils
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1 Lakh / PieceGet Latest Price

    Product Code: EK.DS-100

    Closed-loop servo control of double acting (push/pull) 20 kN (2 ton) shear load actuator with ±25 mm stroke 20 kN (2 ton) normal load capacity with 50 mm stroke Normal load reaction support mounted on sliding bearings to minimize horizontal friction
    Accepts specimens with up to 100 mm (4") diameter or 70 mm (2.75") square specimens
    Software for automatic performance of direct shear tests with constant normal stress or normal stiffness Real time graphical display of test progress
    Mounted on a cart with casters Other load capacities specimen size dimensions are available, including large-scale test systems for shear loads of up to 1,000 kN (100 ton) specimen sizes up to 300 mm diameter or side.

    This system features electro-hydraulic closed-loop digital servo control of the shear and normal loads for test automation. Loads or deformations for both the shear and normal actuators can be prescribed for automatically performing conventional direct shear tests as well as more advanced tests. This system can be easily programmed to perform tests such as the constant normal stiffness test where the normal load is a function of a prescribed stiffness for simulating actual compressibility of a ground shear plane (e.g. soil-pile interaction). The ENKAY Direct Shear Test System is especially well suited to test coarse granular materials because of its large sample size and high load capacity. A major advantage over conventional motorized system is that this system eliminates vibrations that can disturb or densify granular specimens. The EK.DS-100 is mounted on a convenient cart with caster that not only supports the apparatus but also houses the hydraulics inside.

    SPECIFICATION

    Power : 220 VAC


    Yes! I am Interested

    Dynamic Hollow Cylinder Testing System

    REQUEST CALLBACK

    Dynamic Hollow Cylinder Testing System
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.5 Lakh / PieceGet Latest Price

    Product Code: EK.DCT-100

    Angular displacement sensor with a deflection range of ±25° to measure large shear strains (±40° optional) Non-contacting deformation sensors with a ±2.5 mm range to detect small shear strains.
    Standard systems to test 100 mm outside diameter and 50 mm inside diameter (25 mm wall thickness).
    Systems also available to test 150 mm Outer Dia and 75 mm Inner Dia
    Optional unsaturated soils testing system package also available Internal high-speed torque motor for resonant column testing, ultrasonic platens, and temperature controller options also available Complete "turn-key" system

    Direct digital servo control of axial load, torque, confining pressure, internal pressure, and back pressure are achievable using the ENKAY Dynamic Hollow Cylinder Testing System for performing "true triaxial" tests. This system is capable of simulating most field stress/strain path tests (static or dynamic) including plane strain, simple shear, and small shear strains. 

    Other possible tests include, measurement of dynamic shear st rength deformat ion, liquefaction potential, shear modulus and damping ratio. The
    system is versatile in allowing the user to design custom procedures with operating frequencies of up to 50 Hz. The system software advices the user on how to perform testing tasks and also reminds the user of important steps that may need to be executed (such as opening or closing a valve at required test stages). The program helps the user to select proper testing parameters and provides the necessary information to automatically
    execute the test. The Graphical User Interface with context sensitive on-line help and intuitive color windows help minimize the learning time and
    enables laboratory personnel to conduct more sophisticated testing programs at an economical price. The system manages all the
    instrumentation and continuously monitors sensor outputs to accurately account for uplift pressures acting on the loading piston, area changes, deformation and volume change sensor setup, repositioning, etc.

    Yes! I am Interested

    Soil Axial Deformation Device

    REQUEST CALLBACK

    Soil Axial Deformation Device
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 25,000 / PieceGet Latest Price

    Product Code: EK.DF-610

    Standard available sizes include: 71 mm, 100mm, and 150 mm diameter specimens (other sizes available as an option) Horizontally guided to prevent rotation Made of acrylic with lightening holes for minimum mass Can be used for Uniaxial or Triaxial testing

    Measures axial strains directly on specimen Very easy to setup and use. Meets NCHRP requirements

    The ENKAY Soil Deformation Device measures axial strain directly on the specimen providing accurate results. The device consists of an upper and lower support rings machined with a low weight, high strength design. The ENKAY Soil Deformation Device is available in standard sizes and also in custom sizes.
    The DEF-6100-AXC Internal Axial Measurement Device includes two axial LVDT holder rings, soft-tipped and can be used with submersible or standard LVDTs (used with non-conductive media only). The Transducer supports are split in two halves, clamped using rubber bands and guided in order to prevent rotation or “folding” of the two halves while allowing for lateral expansion. For soft specimens, the clamps can be set onto the top and bottom platen to prevent damage to the specimen.

    SPECIFICATION

    Part No. Specimen
    Diameter
    EK-DF-610-AXC-071 71 mm
    EK.DF-610-AXC-100 100 mm
    EK.DF-610-AXC-150 150 mm
    *Note: LVDT sensors and EK.CDD Circumferential Measurement device for radial strains are sold separately


    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Enkay Enterprises
    Varun Tully (Manager)
    605, Padma Tower- 2, No. 22, Rajendra Place , Dariya Ganj,
    New Delhi - 110008, Delhi, India
    Call Us: 
    Call Response Rate: 71%
    Share Us :
    F G T L



    Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us

    © Enkay Enterprises. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Enkay Enterprises